Sony KP-53S75 Convergence?


	FORUM HOME	SEARCH POSTS	WHO'S ONLINE	LOG IN	RULES F.A.Q.

TV Forums: TV Equipment: Projection TV Forum:
Sony KP-53S75 Convergence?

Print Thread

jp_poolplayer
New User

Apr 23, 2007, 4:44 AM

Post #1 of 3 (1475 views)
Shortcut

Sony KP-53S75 Convergence?	Can't Post

1. First the set was dead
2. I replaced the Power Supply board and was able to power up successfully.
3. But now the convergence is out of wak, expecially the green.
4. I cannot bring it into allignment via service mode using the cross hatch pattern and remote control adjustments.

Is this normal after replacing the PS Board? Any ideas on what to adjust?

Thanks ahead of time

denonjapan
Veteran

May 5, 2007, 4:54 PM

Post #2 of 3 (1443 views)
Shortcut

Re: [jp_poolplayer] Sony KP-53S75 Convergence? [In reply to]	Can't Post

This is the kind of result OUT OF WAK, when you do what do people here does best. How could you replace something and don't know, not sure what to adjust? why would you blame the PSB board for colors? Refer it to SONY AUTHORIZED TECH.

denonjapan
made in japan

mikemaiertv
Enthusiast

May 24, 2007, 11:09 PM

Post #3 of 3 (1412 views)
Shortcut

Re: [jp_poolplayer] Sony KP-53S75 Convergence? [In reply to]	Can't Post

Well being the convergance is on the board you replaced, the simple problem might have been the red, green, and blue convergance conections may have been mixed up. But screaming thru the service menu to fix that may have screwed this up real bad. check your conections and for the service menu there are no resets, do-overs or second chances
Mike Owens Owner Competition TV Spokane WA.

Print Thread

Search for (options)

- Page loaded in: 0.10 s on (CGI/1.1)