Emerson/Funai LF320EM4A


	FORUM HOME	SEARCH POSTS	WHO'S ONLINE	LOG IN	RULES F.A.Q.

TV Forums: TV Equipment: TV Repair Forum:
Emerson/Funai LF320EM4A

Print Thread

Techbox
New User

Feb 13, 2018, 7:21 PM

Post #1 of 6 (1558 views)
Shortcut

Emerson/Funai LF320EM4A	Can't Post

Hi-
Took on another project. This LF320EM4A has a black screen and a flashing red light. The board in it is a combination board of power&video which I have already replaced. After attempting to power it up the red light flashes 4 times and then goes back solid red again. I cannot see any image with a flash light on the black screen or any evidence of the LEDs coming up. I have read a lot on this and it has been suggested both the LED strips or the ir sensor are the problem and this is common on this model apparently. Before I go and waste money on the wrong thing again I thought I would ask here. If pictures of anything are needed, let me know

jts1957
Veteran

Feb 13, 2018, 9:15 PM

Post #2 of 6 (1555 views)
Shortcut

Re: [Techbox] Emerson/Funai LF320EM4A [In reply to]	Can't Post

Are the power supplies present? P-ON+21V ... AMP+13V ... AL+5V ... AL+3.3V

-------------------------
Location: Far, Far Away

(This post was edited by jts1957 on Feb 13, 2018, 11:41 PM)

Techbox
New User

Feb 13, 2018, 9:54 PM

Post #3 of 6 (1553 views)
Shortcut

Re: [jts1957] Emerson/Funai LF320EM4A [In reply to]	Can't Post

I'll address what you said first. Here is what I see and have already replaced. This is what I assumed was the primary power/main combo https://www.ebay.com/...0:g:hvAAAOSwor1ab9RN

jts1957
Veteran

Feb 13, 2018, 10:30 PM

Post #4 of 6 (1551 views)
Shortcut

Re: [Techbox] Emerson/Funai LF320EM4A [In reply to]	Can't Post

Sorry, must have lost the 'A' when I copied/pasted. It Does make quite a difference.
First SM I found is gonna be wrong too. ~~Any Idea which 'FL' chassis number?~~

Never mind. Voltages above still apply.

-------------------------
Location: Far, Far Away

(This post was edited by jts1957 on Feb 13, 2018, 10:58 PM)

Techbox
New User

Feb 22, 2018, 5:32 PM

Post #5 of 6 (1484 views)
Shortcut

Re: [jts1957] Emerson/Funai LF320EM4A [In reply to]	Can't Post

Sorry I was slow at my return post, I have been buried in other work. I would like to measure these voltages but I do not know where to. I have a Fluke to do it with.

jts1957
Veteran

Feb 22, 2018, 9:23 PM

Post #6 of 6 (1483 views)
Shortcut

Re: [Techbox] Emerson/Funai LF320EM4A [In reply to]	Can't Post

According to 'G' version schematics:

At cathodes:
D650/D651 = 21V
D653/D655 = 13V

On IC3602:
Pin #3 = 5V
Pin #2 = 3.3V

-------------------------
Location: Far, Far Away

Print Thread

Search for (options)

- Page loaded in: 0.12 s on (CGI/1.1)