KV32S40 Sony Dead


	FORUM HOME	SEARCH POSTS	WHO'S ONLINE	LOG IN	RULES F.A.Q.

TV Forums: TV Equipment: TV Repair Forum:
KV32S40 Sony Dead

Print Thread

tulu
New User

Apr 19, 2005, 3:36 PM

Post #1 of 3 (3189 views)
Shortcut

KV32S40 Sony Dead	Can't Post

HELP!
No raster no sound. The timer/standby light blinks continuous-No pause.
What parts do I need? Where can I buy them? Help!
Thanks to all,
tulu

mel
Veteran

Apr 19, 2005, 11:17 PM

Post #2 of 3 (3172 views)
Shortcut

Re: [tulu] KV32S40 Sony Dead [In reply to]	Can't Post

The continuous blink indicates that there is no reply from the jungle IC (data bus is busy), shorted to ground or held high or the IK video path is defective. It will take actual hands on trouble shooting to determine the exact cause. I would suspect a defective jungle IC but it is kind of expensive to replace just on a suspicion. You might want to check out www.FreeFlatScreens.com/?r=10948674 for an opportunity to earn a free replacment for this set with a little effort on your part.

Hect7369
User

Apr 21, 2005, 5:05 AM

Post #3 of 3 (3150 views)
Shortcut

Re: [tulu] KV32S40 Sony Dead [In reply to]	Can't Post

Hi,Tulu.

Most TVs Sony Red led blinking ,shows error codes.Exam:::If led blinks 2 times,HV holdown is on.

When blinks 4 times Failure Vert/Deflextion.And 5 times,White Balance/screen Control Adj/IC301

Most Failure problems that I have found are,CRT leaky/Vert IC intermittented/Oscillator pulse missing.

Good Luck,

Hect.

Remember,work safetly ,

Print Thread

Search for (options)

- Page loaded in: 0.12 s on (CGI/1.1)