TV Forums

Free Games TV Forums

  Main Index FORUM
HOME 		Search Posts SEARCH
POSTS 		Who's Online WHO'S
ONLINE 		Log in LOG
IN 		Rules & FAQ RULES
F.A.Q.

Crumbtrail TV Forums: TV Equipment: TV Repair Forum:
Mitsubishi CS-31AX1

 
 


nerv2021
New User

Dec 8, 2004, 6:05 AM

Post #1 of 6 (1824 views)
Shortcut
Mitsubishi CS-31AX1 Can't Post
My Mitsubishi has a problem with its Vertical output IC, i get a single white horizontal line across the screen, from what i've read, i need to check for cold solder points and re-solder, however my problem is i cannot locate the Vertical output IC, any help would be greatly appreciated.
-Thanks



minehunter
User

Dec 8, 2004, 1:29 PM

Post #2 of 6 (1821 views)
Shortcut
Re: [nerv2021] Mitsubishi CS-31AX1 [In reply to] Can't Post
On every Mitsi i have ever worked on it's IC401. I believe it's an LA8737 or 38. It is a single line 14 pin IC.


nerv2021
New User

Dec 8, 2004, 11:31 PM

Post #3 of 6 (1817 views)
Shortcut
Re: [minehunter] Mitsubishi CS-31AX1 [In reply to] Can't Post
I cant find IC401, I found IC4E1, right around all of the Vertical adjusters and such, but its a 13 pin, would it be on the PIP board, or on one of the two Main Boards?


mel
Veteran

Dec 9, 2004, 12:18 AM

Post #4 of 6 (1812 views)
Shortcut
Re: [nerv2021] Mitsubishi CS-31AX1 [In reply to] Can't Post
It is a 13 pin LA7837 IC which is mounted to a finned heat Sync on the main board adjacent to the vertical adjust pots. You might also want to check out www.FreeFlatScreens.com/?r=10948674 for an opportunity to earn a free replacement for this set with a little effort on your part.


(This post was edited by mel on Dec 9, 2004, 12:27 AM)


mikemaiertv
Enthusiast


Dec 9, 2004, 12:19 AM

Post #5 of 6 (1812 views)
Shortcut
Re: [nerv2021] Mitsubishi CS-31AX1 [In reply to] Can't Post
Main board to the left of the flyback ( big thingy with a large wire atached to the top of the CRT , on a heat sink just in front of these ajusting pots for width and such , possible part # LA7838
Mike Owens Owner Competition TV Spokane WA.


nerv2021
New User

Dec 9, 2004, 1:05 AM

Post #6 of 6 (1806 views)
Shortcut
Re: [mikemaiertv] Mitsubishi CS-31AX1 [In reply to] Can't Post
Hell Yeah!, i got it. Yeah, there was a hell of a lot of corrosion on the underside of the board, around several of the pins, cleaned that shit off, and resoldered one of the pins, and viola! its beautiful, thank all you guys for your help, i really appreciate it, but what the hell was that shit about free replacement, you just want me to help you get one, im not a fan of pseudo-chain mail kind of thing, but thanks anyway.

 
 
 


Search for (options) - Page loaded in: 0.13 s on (CGI/1.1)
0