Mitsubishi MDL#CS2724


	FORUM HOME	SEARCH POSTS	WHO'S ONLINE	LOG IN	RULES F.A.Q.

TV Forums: TV Equipment: TV Repair Forum:
Mitsubishi MDL#CS2724

Print Thread

cecil35
New User

Aug 1, 2006, 3:01 PM

Post #1 of 7 (1036 views)
Shortcut

Mitsubishi MDL#CS2724	Can't Post

Vert.caps have been removed from this chassis by another shop.And costomer removed it from that shop and brought it to me. Can some one tell me what the values of cap numbers;C4E3,C4E4,C4E5,C4E6, and C4E8 are.I don't have a schematic for this one.Thx,Cecil. Smile

coochieo
New User

Aug 2, 2006, 4:21 AM

Post #2 of 7 (1026 views)
Shortcut

Re: [cecil35] Mitsubishi MDL#CS2724 [In reply to]	Can't Post

went through my notes and found two of the caps on this mdl don't have a diagram either c4e3 1uf 25 volt c4e5 100uf 35 volt maybe someone else help with the rest sorry
ROB

rrobor
Veteran

Aug 2, 2006, 7:49 AM

Post #3 of 7 (1022 views)
Shortcut

Re: [cecil35] Mitsubishi MDL#CS2724 [In reply to]	Can't Post

What is the IC, I suspectthis is the vertical IC, all you need is what it is and it becomes easy

cecil35
New User

Aug 2, 2006, 1:38 PM

Post #4 of 7 (1020 views)
Shortcut

Re: [coochieo] Mitsubishi MDL#CS2724 [In reply to]	Can't Post

Thanks coochieo that much info was a lot of help!!!cecil.

cecil35
New User

Aug 2, 2006, 1:43 PM

Post #5 of 7 (1019 views)
Shortcut

Re: [rrobor] Mitsubishi MDL#CS2724 [In reply to]	Can't Post

Hi Rrobor! I think you misunderstood that all the vertical caps were missing and their values is what I need.I've already replaced the LA7838 vertical IC..Thx,Cecil

rrobor
Veteran

Aug 4, 2006, 9:42 AM

Post #6 of 7 (1003 views)
Shortcut

Re: [cecil35] Mitsubishi MDL#CS2724 [In reply to]	Can't Post

Sorry I didnt, if you know the IC and you are a workshop look at several circuits using the IC, you will find that most are the same or within the tolerance of an electrolytic at 20% its a common IC of a few years back so you should not have an issue with it. In my records I have 24 different models of TV use that from Panasonic NEC Sharp Mitsu and 2 monitors. Or with luck google the IC and you may get the manufacturers test circuit.

cecil35
New User

Aug 4, 2006, 1:32 PM

Post #7 of 7 (1001 views)
Shortcut

Re: [rrobor] Mitsubishi MDL#CS2724 [In reply to]	Can't Post

Thanks again Rrobor,I'll try the mfg.route and see if I can get the vertical caps values.Best of the day to you.Cecil.

Print Thread

Search for (options)

- Page loaded in: 0.14 s on (CGI/1.1)