flyboyvideo
New User
Jun 19, 2005, 4:32 AM
Post #1 of 1
(1235 views)
Shortcut
|
|
Mitsubishi VS-45VA1 Pincushion
|
Can't Post
|
|
I recently inherited a Mitsubishi VS-45VA1 with no picture and good sound. I bypassed the faulty PIP module and the picture came back, but with a serious pincushion problem. I attempted to adjust it out using the internal pots, but the side-pin adjustment will not completely remove it. All the adjustments are functional, but I can't get the pincushion straightened out. I have checked for bad solder joints on the main board, convergence board, and PCC module. I've also checked most of the electrolytic caps on those boards to no avail. Any advise would be greatly appreciated.
James
|
FORUM
SEARCH
WHO'S 
LOG 
RULES