Samsung HCL4715W Parts


	FORUM HOME	SEARCH POSTS	WHO'S ONLINE	LOG IN	RULES F.A.Q.

TV Forums: TV Equipment: TV Repair Forum:
Samsung HCL4715W Parts

Print Thread

VECTRAVL
New User

Sep 11, 2009, 3:29 PM

Post #1 of 6 (2190 views)
Shortcut

Samsung HCL4715W Parts	Can't Post

Hi, My Samsung HCL4715W the colors(3) seperated and picture look like 3D and I believe there is convergence issue. I need the convergence IC part#. Thanks for any input. 

(This post was edited by VECTRAVL on Sep 13, 2009, 8:57 PM)

jts1957
Veteran

Sep 12, 2009, 12:56 AM

Post #2 of 6 (2169 views)
Shortcut

Re: [VECTRAVL] Samsung HCL4715W Parts [In reply to]	Can't Post

STRANGE - They usually print them on the actual parts!

-------------------------
Location: Far, Far Away

VECTRAVL
New User

Sep 12, 2009, 2:06 AM

Post #3 of 6 (2166 views)
Shortcut

Re: [jts1957] Samsung HCL4715W Parts [In reply to]	Can't Post

Thanks for your input. I just guess there is convergence problem after reading from several TV forum.I still try to get the Service repair manual so I can find out the parts# and the location of them. 

(This post was edited by VECTRAVL on Sep 13, 2009, 8:56 PM)

tscheucher
User

Sep 13, 2009, 7:17 PM

Post #4 of 6 (2150 views)
Shortcut

Re: [VECTRAVL] Samsung HCL4715W Parts [In reply to]	Can't Post

Hi VECTRAVL!
You´re right - Convergence ic is faulty, I guess looks like coloured ghost pictures framed around the actual tv picture.
The convergence ic is a STK392-040 see link:http://www.datasheetcatalog.com/...K/3/STK392-040.shtml
and needs to be replaced together with RZ2123 (3R9/2W) and RZ2124 (3R9/2W). Use carbon type resistors if available because the ic is very sensitve to rf and these types of resistors do have better properties in that point. (information on an application note of the chip manufacturer SANYO).
Hope you´re successful - I like RP-TV´s, they´re great!
regards
Thomas

VECTRAVL
New User

Sep 13, 2009, 8:50 PM

Post #5 of 6 (2144 views)
Shortcut

Re: [tscheucher] Samsung HCL4715W Parts [In reply to]	Can't Post

Tnanks a lots for your input.I did ordered 2 IC on Ebay cost $30 for 2 and try to search for the resistors RZ2123 (3R9/2W) and RZ2124 (3R9/2W) without successfull. Do you know where I can buy the resistors online or local parts store like Radio Shack... 

(This post was edited by VECTRAVL on Sep 13, 2009, 8:56 PM)

tscheucher
User

Sep 14, 2009, 8:17 AM

Post #6 of 6 (2133 views)
Shortcut

Re: [VECTRAVL] Samsung HCL4715W Parts [In reply to]	Can't Post

Good to hear that you could find the ic!
They´re obsolete since a long time at Sanyo. 30$´s is a good price for a pair of them - Let´s hope they are new.
Yes, radio shack isn´t the first adress to buy safety resistors. At that point I can´t give you any advice, because I don´t know where you live to do researches in the internet where part stores in your aerea are located who have that type of resistor on stock. I need a bit more information. If you write me an e-mail, I can send you a few of them - For more infos just click on my username at one of the posts.
best regards

Print Thread

Search for (options)

- Page loaded in: 0.13 s on (CGI/1.1)