Sanyo model ds31590


	FORUM HOME	SEARCH POSTS	WHO'S ONLINE	LOG IN	RULES F.A.Q.

TV Forums: TV Equipment: TV Repair Forum:
Sanyo model ds31590

Print Thread

bzpac
New User

Aug 9, 2005, 11:40 PM

Post #1 of 3 (2132 views)
Shortcut

Sanyo model ds31590	Can't Post

Looking for help have sanyo with no picture found burned vertical output chip. Burn marks at pin 3 on LA7841 vert output. Replaced when turning on tv took out a 1 ohm resistor in the b+ comming from the flyback transformer. Any one with any thoughts Thanks Bill

Hect7369
User

Aug 10, 2005, 5:52 AM

Post #2 of 3 (2121 views)
Shortcut

Re: [bzpac] Sanyo model ds31590 [In reply to]	Can't Post

After,replacing IC output Vert,check for Zener diodes and rect-diode (Vert.VVc)near of Flyback transformer,one of these,are shorted!!!

mel
Veteran

Aug 10, 2005, 10:52 PM

Post #3 of 3 (2111 views)
Shortcut

Re: [Hect7369] Sanyo model ds31590 [In reply to]	Can't Post

Check your soldering. Ity is easy to form a solder bridge between the pins when working in such close quarters.

Print Thread

Search for (options)

- Page loaded in: 0.14 s on (CGI/1.1)