Sony Resistor


	FORUM HOME	SEARCH POSTS	WHO'S ONLINE	LOG IN	RULES F.A.Q.

TV Forums: TV Equipment: TV Repair Forum:
Sony Resistor

Print Thread

glen65
New User

May 15, 2007, 9:04 PM

Post #1 of 5 (1208 views)
Shortcut

Sony Resistor	Can't Post

Hello
Just have a couple questions about the 1/2 watt .1 ohm fuse resistor used in Sony TVs Is it a wire wound resistor or some other composition (such as Cerment)? Can you use either one as a replacement?
Thanks.

(This post was edited by glen65 on May 15, 2007, 9:09 PM)

rrobor
Veteran

May 15, 2007, 11:22 PM

Post #2 of 5 (1200 views)
Shortcut

Re: [glen65] Sony Resistor [In reply to]	Can't Post

A safety resistor is not wirewound, the usual is metal film on a ceramic former. No one would use wire for any resistor under say 2W, cost wise its not on. .1ohms is a very low value are you sure you are not looking at a pico fuse some of those can be a 500mm long white box with a wire inside.

glen65
New User

May 16, 2007, 1:06 AM

Post #3 of 5 (1197 views)
Shortcut

Re: [rrobor] Sony Resistor [In reply to]	Can't Post

No it’s not a pico fuse it’s a fusible resistor
its designated as R607. The reason I’m asking this is
because I putting together a parts order for a set and the
place I’m dealing with has everything but they don’t have
a “factory” replacement for the fuse resistor.
However they do have this..
http://www.bdent.com/search/part.jsp?partnum=FNF12NR10KU

I just wanted to find out if this would be ok for a replacement.

rrobor
Veteran

May 16, 2007, 1:17 AM

Post #4 of 5 (1194 views)
Shortcut

Re: [glen65] Sony Resistor [In reply to]	Can't Post

If Wattage is correct any safety resistor of that value is OK.

bobby03
New User

Jun 26, 2007, 4:03 AM

Post #5 of 5 (1132 views)
Shortcut

Re: [glen65] Sony Resistor [In reply to]	Can't Post

If that resistors blows you have to by a Sony kit consisting of 4 parts, 3 parts in some sets. You also have to resolder the Horizontal circuit.

Print Thread

Search for (options)

- Page loaded in: 0.12 s on (CGI/1.1)