Hitachi TV Picture


	FORUM HOME	SEARCH POSTS	WHO'S ONLINE	LOG IN	RULES F.A.Q.

TV Forums: TV Equipment: Big Screen TV:
Hitachi TV Picture

Print Thread

thumpp
New User

Jan 30, 2010, 5:32 PM

Post #1 of 5 (3190 views)
Shortcut

Hitachi TV Picture	Can't Post

We have recently replaced the lamp in our Hitachi model 55VS69A TV.
It ran fine for a day & then we turned it on & few minutes later the picture went black. The power button was still lit & the temperature & lamp light were flashing.
We thought the lamp was blown again so we turned it off. We waited a few minutes, turned it back on & the picture came back on again. A few minutes later again the picture went black. Same lights were on.
Through both attempts the fan was always running.
Any help would be greatly appreciated.
Thanks,
thumpp

jts1957
Veteran

Jan 30, 2010, 6:20 PM

Post #2 of 5 (3189 views)
Shortcut

Re: [thumpp] Hitachi TV Picture [In reply to]	Can't Post

Are you sure you reassembled it correctly? Pay particular attention to any "safety" switches. Switches that have to be engaged properly for set to turn on, I've seen a couple where the switch was bent out of position, etc. Cool

-------------------------
Location: Far, Far Away

Repair man
Enthusiast

Feb 1, 2010, 6:02 AM

Post #3 of 5 (3177 views)
Shortcut

Re: [thumpp] Hitachi TV Picture [In reply to]	Can't Post

It sounds like you have a defective lamp. I just replaced one for a customer this week that was having the exact same problem. His lamp was new (less than a month old; didn't purchase it from me) I tested his lamp in another set and it too would run for a few minutes then went off, I replaced lamp with a new one and problem was solved.

If you need replacement lamps I have them available for most sets for $175 CND funds (plus shipping).

Feel free to email me direct if you (or anyone) need lamps. You can find my email address in my profile section (Just click on my user name for profile)

.

------------------------------------------------------------------------------------------

If you (or anyone reading this post) have any further questions or need clarification please feel free to contact me direct; you can find my email address by clicking on my user-name.

Learn Plasma TV Repair

_________________
Learn LCD TV Repair

1221oiwfiofw666
New User

Feb 20, 2010, 2:22 AM

Post #4 of 5 (3139 views)
Shortcut

Re: [Repair man] Hitachi TV Picture [In reply to]	Can't Post

http://www.dvdmsn.com/...VD-Boxset-p-631.html
http://www.dvdmsn.com/...VD-boxset-p-232.html
http://www.dvdmsn.com/...D-Box-Set-p-634.html

easyab
New User

Feb 28, 2010, 4:16 AM

Post #5 of 5 (3118 views)
Shortcut

Re: [thumpp] Hitachi TV Picture [In reply to]	Can't Post

Hi,

Safety switches, etc., are OK or TV won't start at all. Most likely lamp is faulty or not the correct replacement bulb.

Many suppliers have minimal replacement choices and send out bulb that fits mechanically and not the correct specs for your TV. Result is Early failure or Intermittent operation. Faulty bulbs from reliable sources are extremely rare. If multiple returns of one type of bulb are encountered, complete lot is returned to manufacturer.

Shopping cart operations that sell everything from umbrellas to electronic parts typically buy rejected job lots of goods that did not meet specs or were damaged in shipping. Dropping a forklift load of bulbs will internally damage most of them. Shopping cart boys don't care. Return, etc., is more trouble for consumer than the cost of the bulb.

Check this out for Lamps. http://calgary.convergencerepair.com/lamps.asp

easyab
http://calgary.convergencerepair.com/index.asp

Print Thread

Search for (options)

- Page loaded in: 0.10 s on (CGI/1.1)