Phillips 60PP9202/17F


	FORUM HOME	SEARCH POSTS	WHO'S ONLINE	LOG IN	RULES F.A.Q.

TV Forums: TV Equipment: Big Screen TV:
Phillips 60PP9202/17F

Print Thread

telestereo
New User

Mar 4, 2012, 8:04 PM

Post #1 of 2 (3401 views)
Shortcut

Phillips 60PP9202/17F	Can't Post

Hello all,
I got this Phillips tv model 60PP9202/17. When I turn the tv ON, the LED power comes up but I hear a crackling noise, after a few seconds the power light continues to blink and still NO power on the tv, any advice please

Thanks
Telestereo

Ron.M
Veteran

Mar 6, 2012, 11:30 PM

Post #2 of 2 (3385 views)
Shortcut

Re: [telestereo] Phillips 60PP9202/17F [In reply to]	Can't Post

telestereo;.....

Disconnect connector #1516 at the front end of the LSB panel OR on the SSM panel...
Look for a large finned heat sink that has 2 large ICs on it...
That is the SSM panel...
Right to the edge of that board near the heat sink is connector #1516 also...
IF memory serves , they should be toward the front of the set on the boards...
When you unplug that connector , turn the TV on....
IF the set stays on , you have either a shorted audio output IC OR bad convergence ICs...
Most likely , it's bad convergence ICs...

IF you still hear crackling , you may have a serious HV problem....

Good Luck..... Sly

.....

Later....Ron.M.... Cool

....
Veteran & Retired TV technician

Print Thread

Search for (options)

- Page loaded in: 0.10 s on (CGI/1.1)