TV Forums

Free Games TV Forums

  Main Index FORUM
HOME
Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN
Rules & FAQ RULES
F.A.Q.

Crumbtrail TV Forums: TV Equipment: Projection TV Forum:
Manual Convergence ? 53SDX89B

 

 


Proline2
New User

Aug 17, 2006, 8:35 AM

Post #1 of 3 (1092 views)
Shortcut
Manual Convergence ? 53SDX89B Can't Post

I replaced the ic's on my TV with with STK 392 180 , thanks to this site all went smooth. I have had a few people tell me that the picture does not look as sharp and clear as it did before. I've done the Magic Focus. I have read that you need to do a manual convergence after changing ic's so the settings will be right in the "memory". When I hold in the Magic focus button I get a "Center mode" then a "Static Mode" screen, in the static mode the horizonal red line is slightly curved down on the outsides. This is after running Magic focus. Do I need to do a manual convergence? Will this help the picture quality? And where can I find instructions for doing this if I need to do it? If I was to purchase a service manual would it cover doing a manual convergence? Thanks again for all the help.. Dan


(This post was edited by Proline2 on Aug 17, 2006, 8:36 AM)



techchris
Veteran

Aug 17, 2006, 10:33 AM

Post #2 of 3 (1085 views)
Shortcut
Re: [Proline2] Manual Convergence ? 53SDX89B [In reply to] Can't Post

it sounds like the convergence needs a tweak. it will tell you how to do this in the service manual but as you did'nt post make or model its hard to advise you more here.


Proline2
New User

Aug 17, 2006, 3:46 PM

Post #3 of 3 (1084 views)
Shortcut
Re: [techchris] Manual Convergence ? 53SDX89B [In reply to] Can't Post

Sorry about that. It was late when I first posted. It is a Hitachi RPTV model 53SDX89B

 
 
 


Search for (options) - Page loaded in: 0.10 s on (CGI/1.1)
0