Just replaced a faulty Hi Voltage splitter and now my convergence is off. Using the on screen adj. I got every thing lined up with the exception of the blue horz. it is at full down and still high of the green/red. I tried the convergence panel on the front of the set but can't tell what kind of a tool it takes to make any adjustments. I was going to bring the green up to the blue and adj. the red to that.
Figured out myself, the tool is an odd sized allen wrench I'm sure RCA makes as an expensive "tool" to do this. for my convergence problem I had to adjust the blue gun hoiz adj. ring on the base of the gun yoke. that did the trick except I had to fine "tweek" some of my coinvergence board adjustments I should have left alone in the first place.
FORUM
SEARCH
WHO'S 
LOG 
RULES
Re: [piper45r] RCA P52770eb convergence
[
Figured out myself, the tool is an odd sized allen wrench I'm sure RCA makes as an expensive "tool" to do this. for my convergence problem I had to adjust the blue gun hoiz adj. ring on the base of the gun yoke. that did the trick except I had to fine "tweek" some of my coinvergence board adjustments I should have left alone in the first place. 